gotech ecu map
28 February 2010, 07:50 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2008
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
gotech ecu map
need a base map for a gotech MFI PRO ecu. the software is called 'dealer tune 6'. its for a 96 classic impreza turbo.
the software is found here - Software
and the ecu info is found here - Gotech MFI PRO
theres no base map with the software package for subaru but the base maps are here if anyone is interested http://gotech.co.za/mapsa.html
if it helps its got a stainless manifold to turbo and straight through to back box on the exhaust
the software is found here - Software
and the ecu info is found here - Gotech MFI PRO
theres no base map with the software package for subaru but the base maps are here if anyone is interested http://gotech.co.za/mapsa.html
if it helps its got a stainless manifold to turbo and straight through to back box on the exhaust
Last edited by stevieg89; 28 February 2010 at 07:58 PM.
02 March 2010, 08:44 PM
#2
Can't help you there I'm afraid.
Just had a quick look at the product though, does is support the subaru crank sensor input? I thought Subaru use a 6 or 7 tooth crank sensor with odd spacings?! It looked like it would only support even crank pickups with standard 60-2, 36-1 etc. I'm sure someone will correct me.
Just had a quick look at the product though, does is support the subaru crank sensor input? I thought Subaru use a 6 or 7 tooth crank sensor with odd spacings?! It looked like it would only support even crank pickups with standard 60-2, 36-1 etc. I'm sure someone will correct me.
03 March 2010, 02:20 PM
#3
Scooby Regular
Thread Starter
Join Date: Feb 2008
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
cheers for that.
had a good look through the manual and think that the 36 -1 is the way forward. had a go at grinding each tooth but the TDC tooth but thats not the one the ECU needs to know where there crank is but the machine shop is going to make up a 36-1 ring for me
if anyone else is interested in getting one of these ECUs i can get a contact number for you
had a good look through the manual and think that the 36 -1 is the way forward. had a go at grinding each tooth but the TDC tooth but thats not the one the ECU needs to know where there crank is but the machine shop is going to make up a 36-1 ring for me
if anyone else is interested in getting one of these ECUs i can get a contact number for you
Last edited by stevieg89; 03 March 2010 at 02:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
