I'm looking to move my numberplate to a sticker on the bonnet on the uk bumper they have a black which the plate screws on to, can this block be removed or is it moulded to the bumper?

Has anyone done it?

Darc

 

I can't help with the technical side, but will put forward a quick warning.
As I'm sure you're aware the stickers are not 'legal' numberplates as there are none available with the correct E mark for their reflective background/typefont.

Dave

 

Could go this way and put it on the splitter plate is 70% of regulation and no bother from the plod as yet?
The bit the plate is bolted to as standard is moulded as part of the bumper. I just cut it off

 

ok thanks guys

yeah i know its not ment to be a sticker

i will have a closer look tomo to see if its worth the hassle of cutting it off

as im sure it will cause some kinda damage cutting it offf

darc

 

the bracket which the plate is screwed to is held on by 2 torx type screws but with a pin in the center.I didnt have the correct type of torx bit to remove so drilled it out and came off with no marks or damage. i use a stick-on plate on my front splitter with no problem from the police as yet but it is not MOT legal. i use a real plate with double sided tape to get it through the mot and then it goes in the boot.

Rich

Rich