tomski

iTrader: (1)

Hi, I have just been fitting my new Walbro fuel pump. My car is a 2002 wrx wagon
All went to plan apart from one thing I am not sure is ok. When fitting the pump in place the part at the top of the pump that the rubber hose goes over is almost touching the brass coloured pipe that it connects to. Is that going to be ok. I am sure I read about making that pipe shorter by making the rubber hose on the other end of the brass pipe shorter, but mine is all in one piece.
Thanks in advance
Andrew

addison

mine was a tight fit so much so they were touching
thats how it is ment to be
so all ok

tomski

iTrader: (1)

Pics of what I am talking about on the 9th pic down on this link.
http://www.scoobymods.com/mod_best_d...26.html?t=8426.
Is it going to cause any probs running it that near to the pipe.
Andrew

addison

its fine you can see it touching in the pic
i have done 10000 miles since fitting all ok

STI_Baly

iTrader: (23)

You should be ok and it shouldn't cause any issues.

tomski

iTrader: (1)

Thanks for that.
Andrew