wont start after new clutch
#1
wont start after new clutch
hi yesterday i changed my clutch on my99 uk turbo.
I removed the engine but only forwards enough to do the clutch.
No wires were unpluged and it went back together fine.
When i came to start it the starter motor was ticking like it was stuck every time i turned the key, after a few turns it stops this and turns the engine over the wrong way then stops.
This has baffeled me.
Can anyone help or have any ideas
thanks
I removed the engine but only forwards enough to do the clutch.
No wires were unpluged and it went back together fine.
When i came to start it the starter motor was ticking like it was stuck every time i turned the key, after a few turns it stops this and turns the engine over the wrong way then stops.
This has baffeled me.
Can anyone help or have any ideas
thanks
#4
Scooby Regular
iTrader: (19)
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes
on
0 Posts
have you reconnected the earth mate. should be connected to the top nut of the starter
the other thing, is every thing alined mate. the presure bearing/fork ect. if not, they could be jamming it.
the other thing, is every thing alined mate. the presure bearing/fork ect. if not, they could be jamming it.
Thread
Thread Starter
Forum
Replies
Last Post
speedrick
Subaru Parts
0
26 September 2015 03:01 PM