ray1501

Don't know if mine is working or not. Have been told can adjust so far it will never come on. Do not know how to adjust, so do not know if broken or not. It's an 02 Bugeye STI.. Help please!

360ste

iTrader: (1)

Just been out to check. Under the external temperature gauge is the adjusting ****. Turn the ignition on but don't start the car, turn itto the left or right and hold it there. You will see two numbers counting up, this the revsadjust missing the last two zero's. Once at your desired limit let go and it will beep, it will also show two dashes rotate the **** to the right again and it will display "on". That is it set and ready to go. For ease of testing set it at about 2000 rpm, start the car and speed up gently, once you know it works you can use the same procedure to adjus it to what you want. This does not put a limit on the revs just gives you an indication.

Hope this helps Steve.

ray1501

Thanks a lot, Steve. Will go and try that and let you know! Cheers for info..

360ste

iTrader: (1)

Should be on for another hour or so.

ray1501

nothing doing not a stirr would not be a fuse take it that out side temp would be gone too suppose it just broken, ??