subaru help please
15 July 2009, 06:48 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2009
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
subaru help please
hi chaps.i have a subaru turbo wagon 1997/98
does anyone know how you remove the front bumper? good starting place or where the bolts are located please?
also upon release of the clutch you always get judder as you pull away slowly or quickly, warm or cold, anyone have any ideas.
thankyou.
stu
15 July 2009, 08:42 PM
#2
Scooby Regular
iTrader: (6)
Join Date: Apr 2009
Location: Devon
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Ive just done the bumper on my 95wrx.
You'll need to take down the front part of the arch liners and separate the bumper from the wing and poss innner wing.
Then under the car are a couple of nuts and clips.
There should be 4 bolts in the engine bay for the bumper iron then it slides out.
Oh you also need to disconnect the fogs and indicators before anything else.
If you want to separate the skin from the support bar(iron) best get some new clips for reattaching (scooby bits sent mine up - really top guy for anything you need).
Cant help on the clutch - is it the orig or uprated -have read some of them can judder for a passtime!
All the best.
You'll need to take down the front part of the arch liners and separate the bumper from the wing and poss innner wing.
Then under the car are a couple of nuts and clips.
There should be 4 bolts in the engine bay for the bumper iron then it slides out.
Oh you also need to disconnect the fogs and indicators before anything else.
If you want to separate the skin from the support bar(iron) best get some new clips for reattaching (scooby bits sent mine up - really top guy for anything you need).
Cant help on the clutch - is it the orig or uprated -have read some of them can judder for a passtime!
All the best.
Thread
Thread Starter
Forum
Replies
Last Post