Hi sorry to keep posting just stuck again,
i have a 1995 wrx short block with my 99 heads on and the 99 tensiioner but i dnt have a clue on how to fit the cambelt, as i posted before my LH side cams are a bit harder to turn than the RH side torqued up correctly. i just dont want to get this wrong this is my first scooby and im 18 and the reson im doing this is down to det damage and im on a tight budged lol any help will be great and its been 3 month now and still its not running

 

i done the headgasket on mine a while back and remember mine were like that to!being a mechanic i took it apart again,checkd it all again and torqued it up again and was still the same and has bin fine!
just make sure the o/s exhaust cam timing is right,i was warned you can get it 180 deg out!!

 

Have you got any guides to do this ?

 

I bought one of these:

AUTODATA TIMING BELT BOOK 2005 on eBay, also, Other Car Parts, Car Parts, Cars, Parts Vehicles (end time 16-May-09 11:30:39 BST)

One of the best things I ever bought! Nearly every car you can think of with instructions of how to remove and reinstall + torque settings etc etc...

Great!!