induction Kit
#1
Help!
I want to put an induction kit on the P1, as have got the full HKS system (super dragger), and was wondering what to go for - noise isn't an issue as it's a second car.
Heard some horror stories about the quality of the filtration, and it also buggering up the air flow sensor, which if that goes makes the car run like a pile of pooh.
Ahy ideas, everyone I spoke to said don't get an oil based filter, get a wax based one?
Please help!
I want to put an induction kit on the P1, as have got the full HKS system (super dragger), and was wondering what to go for - noise isn't an issue as it's a second car.
Heard some horror stories about the quality of the filtration, and it also buggering up the air flow sensor, which if that goes makes the car run like a pile of pooh.
Ahy ideas, everyone I spoke to said don't get an oil based filter, get a wax based one?
Please help!
#2
#3
Scooby Regular
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
There has always been quite a lot of talk about the best induction kits:
Blitz for example has led to a lot of MAF faliures but there will be people out there who have not had any faliures with it
APS Cold Air Kit is renowned to be one of the best, I don't think there are any MAF faliures with this kit on..but could be mistaken!
K&N 57i Again very reliable, again I have not heard of any faliures with this.
Not sure about HKS I am sure others will join in soon
Blitz for example has led to a lot of MAF faliures but there will be people out there who have not had any faliures with it
APS Cold Air Kit is renowned to be one of the best, I don't think there are any MAF faliures with this kit on..but could be mistaken!
K&N 57i Again very reliable, again I have not heard of any faliures with this.
Not sure about HKS I am sure others will join in soon
#5
HKS is not recommended for normal street use, the filtration capability is rather poor. I think the most important is to firmly attache the induction kit, as vibrations are more an issue for the MAF as is the filter itself.
I'm very happy with my APEX'i, one, try to get one, if you find someone in your area who has them.
Ramon
I'm very happy with my APEX'i, one, try to get one, if you find someone in your area who has them.
Ramon
#6
I am currently using Green.... Dont seem to have any probs at the min touch wood!!! It has all the right bits aswell so all pipes are plummed back into where they should go!!!
Has a nice noise too mate
Has a nice noise too mate
#7
Would agree with Alberick on that.
Apexi or APS everytime. APS flows so much air it can cause lean running - but I guess all the good ones do.
Blitz and HKS, if those tests are anything to go by, you may as well not run a filter at all.
Apexi or APS everytime. APS flows so much air it can cause lean running - but I guess all the good ones do.
Blitz and HKS, if those tests are anything to go by, you may as well not run a filter at all.
Trending Topics
#8
Scooby Regular
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
Craig,
Do you not rate the K&N's in your vast experience? Just out of interest!
Cheers m8
Do you not rate the K&N's in your vast experience? Just out of interest!
Cheers m8
Thread
Thread Starter
Forum
Replies
Last Post