Notices
General Technical
Sponsored by:
Sponsored by: CARiD

help needed

Thread Tools
 
Search this Thread
 
Old Mar 21, 2009 | 11:06 AM
  #1  
liam12345's Avatar
liam12345
Thread Starter
Scooby Newbie
 
Joined: Mar 2009
Posts: 2
Likes: 0
Default help needed

hi all im new to owning a wrx import it has a td05 turbo and a turbo back exaust system as far as i no lol.when i accelarate hard it gets to about 4500rpm and its like hitting the limiter but its verry violent.can any one tell me what this is.
all help apreciated.
Reply
Old Mar 21, 2009 | 11:14 AM
  #2  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

Is the CEL (check engine light) on as 4500rpm is normally the limit when the ECU is in 'Limp Home' mode (protecting the engine from damage) even if it's not on have a look here Scoobypedia | Trusted knowledge for everything Subaru | Scoobypedia / Scoobypedia under the 'ECU' heading on a how to check for error codes and reset the ecu.
Reply
Old Mar 21, 2009 | 01:12 PM
  #3  
dlatch's Avatar
dlatch
Scooby Regular
 
Joined: Sep 2002
Posts: 180
Likes: 0
From: chorleywood
Default

sounds like fuel cut is another possability
does it pull hard until 4.5k rpm and then cut power?
Reply
Old Mar 21, 2009 | 05:40 PM
  #4  
Marx Mcrae's Avatar
Marx Mcrae
Scooby Regular
iTrader: (4)
 
Joined: May 2003
Posts: 2,567
Likes: 0
From: Doncaster, UK
Default

Sounds like fuel cut to me.
Cheapest way to cure it is with a fuel cut defender, but there a bit crude.
You really need to get the car mapped properly for the mods that the car has.

What year is the car on, if its a 94-97 car then you might be able to buy a "scoobyecu" sencond had from this forum
Reply
Old Mar 21, 2009 | 06:47 PM
  #5  
liam12345's Avatar
liam12345
Thread Starter
Scooby Newbie
 
Joined: Mar 2009
Posts: 2
Likes: 0
Default

hi thanks for the replys .when i had a look thismorning at the car the pipe on the botem of the boost solinoid was drawing air as the pipe was just hanging loose .its a 1993 wrx .
Reply
Old Mar 21, 2009 | 08:32 PM
  #6  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

Originally Posted by liam12345
hi thanks for the replys .when i had a look thismorning at the car the pipe on the botem of the boost solinoid was drawing air as the pipe was just hanging loose .its a 1993 wrx .

Reconnect (as i'm sure you have done )it as that hose has a restrictor in it and on the early cars without it you will get overboost leading to fuel cut
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MH-Racing
Subaru Parts
18
Oct 18, 2015 04:49 PM
taylor85
Wanted
2
Sep 13, 2015 04:57 PM
AzzDSM
Engine Management and ECU Remapping
4
Sep 13, 2015 03:59 PM
Scooby-Doo 2
Wheels And Tyres For Sale
1
Sep 9, 2015 06:51 PM




All times are GMT +1. The time now is 05:54 AM.