My car is a MY97 Turbo 2000 but is currently having the following fitted;

1996 CLOSED DECK ENGINE, BUILT FROM GENUINE TYPE RA STI
JE FORGED PISTONS RE-BORED TO 92.5MM
EAGLE FORGED STEEL H BEAM RODS ARP BOLTS
VERSION 9 CROSS DRILLED TUFTRIDED CRANK
ACL RACE SERIES BEARINGS
HIGH PRESSURE OIL PUMP
ARP HEAD STUD CONVERSION, COMETIC GASKETS (1.3MM)
WRX HEADS
TD05 OR VF34 TURBO

Apart from clutch and headers I just need to buy suitable injectors/fuel rail to fit the above. Now, I could buy standard STI injectors from a MY96 but is it worth upgrading to a higher spec?. Aiming for around 320-350bhp.

Any advise would be much appreciated as this is the first time I`ve had to do this.

 

i have been looking at this and have been told 440's with an uprated fuel pressure reg, or go for 550's should be about £200/£300

 

Thanks for the reply. Going with the 440`s for now and I have an adjustable FPR and fuel pump.

Keeping to about 300-320bhp for now as money is running out rapidly.