TD04 to TD05 Swap Help
06 March 2009, 10:41 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2009
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
TD04 to TD05 Swap Help
Hi,
Ive aquired a TD05 16g for my bugeye, is this a stright swap?
anything i need to watch for?
Any new pipes required (Extensions)
Any advice accepted as it looks like the td04 has a few extra pipes.
Cheers
Simon
Ive aquired a TD05 16g for my bugeye, is this a stright swap?
anything i need to watch for?
Any new pipes required (Extensions)
Any advice accepted as it looks like the td04 has a few extra pipes.
Cheers
Simon
06 March 2009, 12:12 PM
#2
Scooby Regular
Join Date: Oct 2008
Location: Somewhere in Glasgow
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Hi pal I did this myself on a bug.
The job is easy enough, little tricky.
I would do your de car up pipe and downpipe while your at it.
I found the oil retun feed hose (metal one which has mini gasket inside)was too short on the td05 so I just swapped this with the td04 one.
I also found the actuator end was a bit bigger than the one on the td04.
I would recomment buying some vacuum pipe from ebay getting 4".
The job is easy enough, little tricky.
I would do your de car up pipe and downpipe while your at it.
I found the oil retun feed hose (metal one which has mini gasket inside)was too short on the td05 so I just swapped this with the td04 one.
I also found the actuator end was a bit bigger than the one on the td04.
I would recomment buying some vacuum pipe from ebay getting 4".
06 March 2009, 01:24 PM
#4
Scooby Regular
Join Date: Jun 2006
Location: Nottingham
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM