INDUCTION KIT ADVANTAGE
25 February 2009, 07:26 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2007
Location: tyne and wear
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
INDUCTION KIT ADVANTAGE
Hello
Does anyone know if k&n induction kits make a difference in power, especially when the car was remapped with a normal air filter kit fitted, i just dont know, me wife thinks the car runs smoother without the induction kit, but i was thinking of refitting the induction kit.
Does anyone know if k&n induction kits make a difference in power, especially when the car was remapped with a normal air filter kit fitted, i just dont know, me wife thinks the car runs smoother without the induction kit, but i was thinking of refitting the induction kit.
25 February 2009, 08:04 PM
#2
Strictly speaking your map has been set up to the mods as where, fitting an IK will unless fitted with a heat shield only draw in warm under bonnet air and not the nice cold dense air required.
Personally i would stick with the OE air box and fit a KnN or Green panel
1-0 to the Mrs
Pages 11-13 should help https://www.scoobynet.com/scoobynet-...ge-1-a-11.html
Personally i would stick with the OE air box and fit a KnN or Green panel
1-0 to the Mrs
Pages 11-13 should help https://www.scoobynet.com/scoobynet-...ge-1-a-11.html
Last edited by Glowplug; 25 February 2009 at 08:09 PM.
25 February 2009, 08:40 PM
#3
Scooby Regular
Thread Starter
Join Date: Aug 2007
Location: tyne and wear
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Strictly speaking your map has been set up to the mods as where, fitting an IK will unless fitted with a heat shield only draw in warm under bonnet air and not the nice cold dense air required.
Personally i would stick with the OE air box and fit a KnN or Green panel
1-0 to the Mrs
Pages 11-13 should help https://www.scoobynet.com/scoobynet-...ge-1-a-11.html
Personally i would stick with the OE air box and fit a KnN or Green panel
1-0 to the Mrs
Pages 11-13 should help https://www.scoobynet.com/scoobynet-...ge-1-a-11.html
got a induction vent fitted to that side will that do
25 February 2009, 09:05 PM
#5
Scooby Regular
Thread Starter
Join Date: Aug 2007
Location: tyne and wear
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post