help fitting a part please
03 February 2009, 11:45 AM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: always sat here
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
help fitting a part please
Hi
I bought a pair of vent covers for my WRX had no prob fitting the right hand side one but the left one im confused at - sorry if this may be a trivial thing but....
this is the part that came for the left side
and as you can see from pictures it has a bump in it so that means it does not sit flush with the vent on my bonnet - why ??? and how am i supposed to fit it ???
any advice appreciated please lads
I bought a pair of vent covers for my WRX had no prob fitting the right hand side one but the left one im confused at - sorry if this may be a trivial thing but....
this is the part that came for the left side
and as you can see from pictures it has a bump in it so that means it does not sit flush with the vent on my bonnet - why ??? and how am i supposed to fit it ???
any advice appreciated please lads
03 February 2009, 10:09 PM
#2
Er... The 'bump' faces downwards under the pasenger side vent (only fits one way round correctly anyway). I assume the 'bowl' is designed to channel water out of the little hole at the bottom.
Last edited by joz8968; 03 February 2009 at 10:12 PM.
at the OP 
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM