forge dump valve fitting
#1
Scooby Regular
Thread Starter
Join Date: Jan 2009
Location: essex
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
forge dump valve fitting
im new to the scooby scene and love it allready. i have just bought a forge dump valve and it arrived with no fitting kit and no instructions.
all that was in the box was the valve and what looks like an end cap or bung.
thought i would ask for advice before pulling bits off. im not sure what to do to fit.
the car is 2002 wrx sti type uk
cheers
all that was in the box was the valve and what looks like an end cap or bung.
thought i would ask for advice before pulling bits off. im not sure what to do to fit.
the car is 2002 wrx sti type uk
cheers
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Well as it's a Prodrive....
0. Remove small black pipe from std DV.
1. Un-bolt std DV don't drop bolts or gasket !
2. Wrestle clip from re-circ hose, don't drop !
3. Shove bung into re-circ hose and return clip.
4. Bolt Forge DV onto IC, replace black hose.
5. Wash hands, and test drive.
I've had mine years.
LOL
dunx
0. Remove small black pipe from std DV.
1. Un-bolt std DV don't drop bolts or gasket !
2. Wrestle clip from re-circ hose, don't drop !
3. Shove bung into re-circ hose and return clip.
4. Bolt Forge DV onto IC, replace black hose.
5. Wash hands, and test drive.
I've had mine years.
LOL
dunx
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM