Hi cud anyone help,Ive currently taken off the baileys dump valve that was fitted to MY98 scoob and Im wanting to put the standard dump valve on but I dont know where the pipes go into as it appears to have an in and out flow but Im not sure where the out pipe contacts to.It isnt the type that bolts onto the intercooler.
Thanx.

 

It vents to inlet via a pipe that close to your manifold, the pipe may be blocked of if the dump valve that was fitted before was a vta. Have a look around the area where the intercooler is seated, the pipe should be to the right of the throttle body as you face the car.

 

Thanx there is a samco 'blocker' just below where the dump valve was sited.

 

Thats most likely the one, it should run to your induction pipe IE the pipe between the turbo inlet and air filter.

 

Yeh it does thanks a lot for all the advise cheers.