Notices
General Technical
Sponsored by:
Sponsored by: CARiD

hi, got a missfire with 3 fault codes, plz help

Thread Tools
 
Search this Thread
 
Old Dec 17, 2008 | 05:00 PM
  #1  
Alex001's Avatar
Alex001
Thread Starter
Scooby Newbie
 
Joined: Dec 2008
Posts: 2
Likes: 0
Default hi, got a missfire with 3 fault codes, plz help

hi there i have a 1995 sti (import) i have a missfire, runs very lumpy, and very poor power, seems very flat, the engine light has been on but is off now,

i have conected the two black diagnostic conectors under the steering coloum and have found:-

21 - engine colant temp sensor?

24 - idle control valve?

31 - throtle position sensor?

can anyone plz help me with this? are these faults related?

thanks mark
Reply
Old Dec 17, 2008 | 05:31 PM
  #2  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

Firstly reset the ecu and see which code reoccur.
Is rad fan when engine cold?
If so the coolant temp sensor def failed or not plugged in etc
Reply
Old Dec 17, 2008 | 06:53 PM
  #3  
Alex001's Avatar
Alex001
Thread Starter
Scooby Newbie
 
Joined: Dec 2008
Posts: 2
Likes: 0
Default

ideal, i have reset the ecu once and the engine light has gone off, but the same three faults are still there, the temp sensor is pluged in, if the sensor is faulty will it cause it to missfire? also would the other two faults b related?
thanks mark
Reply
Old Dec 17, 2008 | 09:44 PM
  #4  
demon dub's Avatar
demon dub
Scooby Regular
 
Joined: Oct 2008
Posts: 85
Likes: 0
Default

hi alex,i hav a 95 sti import,also with a misfire,hissing,lost all power,smokking & smells of fuel,seems the throttle body its self is worn were the throttle mounts,its worth a check that sensors not wobbling around,give that a quick look
Reply
Old Dec 17, 2008 | 09:50 PM
  #5  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

Originally Posted by Alex001
ideal, i have reset the ecu once and the engine light has gone off, but the same three faults are still there, the temp sensor is pluged in, if the sensor is faulty will it cause it to missfire? also would the other two faults b related?
thanks mark
are the rad fans on all the time????
Reply
Old Dec 17, 2008 | 09:51 PM
  #6  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

Originally Posted by demon dub
hi alex,i hav a 95 sti import,also with a misfire,hissing,lost all power,smokking & smells of fuel,seems the throttle body its self is worn were the throttle mounts,its worth a check that sensors not wobbling around,give that a quick look
that sounds like dumpvalve stuck open or split intercooler pipework.. check between turbo and intercooler etc..

Simon
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Darrell@Scoobyworx
Trader Announcements
26
Jan 30, 2024 01:27 PM
Abx
Subaru
22
Jan 9, 2016 05:42 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM




All times are GMT +1. The time now is 08:01 PM.