Notices

engine cutting trouble please help ! thx

Thread Tools
 
Search this Thread
 
Old 04 December 2008, 08:27 PM
  #1  
yash
Scooby Regular
Thread Starter
iTrader: (1)
 
yash's Avatar
 
Join Date: Sep 2008
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default engine cutting trouble please help ! thx

hi guys. been having a problem wiv me scoob. the problem is that each time i reach a junction or round about the engine cuts. ( everytime i stop actually ) unless i put in neutral then stop. the rev goes low enough to cut the engine. but when car is idleing its fine. it idles at 850 rpm ( when warm ) and doesnt drop or go up. i thought it mite be sparks plugs. i changed them 2day but same thing. and when car is idleing if i rev it goes up and down enough to make the car stall. please help. i want to do the ecu diagnostic but seems complicated with the pulse thing.

i made a video of the diagnosis would any1 please decode it for me

100_0087.flv - Video - Photobucket - Video and Image Hosting

hey guys big problem 2day ! was driving back home. was onn boost coming off a round about and boost cut out. and the car is running bad. just want to cut out ! wont boost i wont go anywhere. is the maf totally gone??

managed to get home. now when i start the car is running very rough. idleing rough but when i take the maf plug out. it idles better but havent tried to drive it againn !! wat have gone wrong

i made a video of the diagnostic. please some1 decode it for me plz
Old 04 December 2008, 09:00 PM
  #2  
adzer
Scooby Regular
iTrader: (13)
 
adzer's Avatar
 
Join Date: Jul 2008
Posts: 1,748
Likes: 0
Received 0 Likes on 0 Posts
Default

its a nice simple fix...............new air flow meter

code 23 is the error code which is air flow meter

also when you unplug the air flow when running it should stall the car if working correctly.
Old 04 December 2008, 10:19 PM
  #3  
yash
Scooby Regular
Thread Starter
iTrader: (1)
 
yash's Avatar
 
Join Date: Sep 2008
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

thx for rep. any1 knows where i should order one from and how much?
Old 04 December 2008, 10:31 PM
  #4  
myblackwrx
Scooby Regular
iTrader: (1)
 
myblackwrx's Avatar
 
Join Date: Mar 2006
Location: Dorset
Posts: 8,787
Likes: 0
Received 1 Like on 1 Post
Default

cheam motors (Home Page - - Cheam Motors cost depends on what year car
Old 04 December 2008, 10:38 PM
  #5  
yash
Scooby Regular
Thread Starter
iTrader: (1)
 
yash's Avatar
 
Join Date: Sep 2008
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

will call them 2morow. its 1995 uk turbo 2000
Old 06 December 2008, 09:31 PM
  #6  
yash
Scooby Regular
Thread Starter
iTrader: (1)
 
yash's Avatar
 
Join Date: Sep 2008
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

hi guys. changed the maf and started the car. was still not running good. so i decided to check all the pipes and saw a pipe came off the turbo. i dont know the exact name. added a stock picture to show which pipe. after examining the pipe saw that its split broken. could this has done any damage to the intercooler?? and any knows a part number for the pipe or its name. thx for help guys

heres the picture

Old 06 December 2008, 10:04 PM
  #7  
myblackwrx
Scooby Regular
iTrader: (1)
 
myblackwrx's Avatar
 
Join Date: Mar 2006
Location: Dorset
Posts: 8,787
Likes: 0
Received 1 Like on 1 Post
Default

it's the intercooler y pipe, don't know the part number though.

It shouldn't cause any damage to the intercooler
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
02 July 2023 01:54 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
kenc
Wanted
6
02 October 2015 09:12 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
Scooby_Lee101
General Technical
3
26 September 2015 12:04 AM



Quick Reply: engine cutting trouble please help ! thx



All times are GMT +1. The time now is 05:21 AM.