are the nismo z32 550cc injector a straight bolt on to the ej20K fuel rail? will the standard subaru injector socket be straight plug into the Z32 injectors?

Could anyone help me get an aswer to these before i purchase the Z32 injectors thanks in advance guys

 

some confusion here.. the z32 is a maf sensor.

the nismo injectors will need adaptors for ej20g and ej20k fuel rails.

the OE plugs go on if you remove a lug on the side of the injectors.

Simon

 

simon: a japanese supplier told me the nismo 555cc injector off a z32 will fit directly on the Ej20K rail. so i assume this is correct? what type of adapter is needed by the way ? hope you could refer me a picture of the adaptor

 

I have Nismo 550cc injectors(side feed purple top) that are a direct fit into Subaru fuel rail but require either the correct wiring harness to connect the plugs to the injectors or as JGM says file the lug of the injector then use a cable tie to stop it pulling off.
There are also yellow top Nismo 550's that need adaptors to fit to the Subaru fuel rails but are pre modified to except the Subaru injector wiring plug.

Like these... Fuel Injectors - Flat4online.co.uk Subaru Impreza Mitsubishi Evolution EVO Walbro Fuel Pumps Injectors Intercoolers

 

jayallen: thanks mate really appreciate it with the link that you send me