bigend problem
23 October 2008, 08:29 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: carrickfergus
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
wrx bigend problem
hi all i have a 1996 wrx scooby i had it out for a big blast and now have a bigend knock
some info please can i take the crank out and get it reground or can i just change the bearings.
thanks for all your help
some info please can i take the crank out and get it reground or can i just change the bearings.
thanks for all your help
Last edited by ernieman; 23 October 2008 at 08:52 PM. Reason: wrong title
24 October 2008, 12:11 PM
#3
Scooby Regular
Join Date: Jun 2007
Location: bracebridge heath
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
there less than £300 & a full set of shells aound £100,tho i risked it & did the ebay route & got a low millage as good as new crank for around £100 & it's been ok so far
...
but you can't just take the crank out i'm arrraid
it's a complete engine strip down
...so you will have other costs such as head gasket,other gaskets & seals & cam belts...
...but you can't just take the crank out i'm arrraid
it's a complete engine strip down ...so you will have other costs such as head gasket,other gaskets & seals & cam belts...
24 October 2008, 04:00 PM
#5
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: carrickfergus
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
THANKS
hi all thanks for the help think i have found a full engine for 500 my friend owns a scrap yard 
if i do get it i will put my engine up for parts cause it was a rocket
if i do get it i will put my engine up for parts cause it was a rocket
Thread
Thread Starter
Forum
Replies
Last Post