Doing a complete decat on a 98 uk turbo tommorow. Ive decided to fit a mbc just to keep the boost under control while a mapable ecu is sorced and mapped.

Any one got a diagram of how there plumbed in? or do i put it in place of the excisting boost solonoid? Obviosly the electrics on the o/e part need to remain connected to stop a cel.

Thanks

 

bttt

 

Remove pipework from compressor and actuator , replace with a straight bit of pipe with the MBC fitted in the middle..
Depending on the type of MBC it may have a restrictor in one end , put this end facing the compressor and the other end to the actuator...

 

thanks