my tdo4 turbo on my 97 classic is slightly smoking so was thinking of changing to a td05 next week also i am having a uprated fuel pump and a boost controller as stock one faulty do i need a re map or will it all work ok but if i had re map i would gain more bhp please excuse my ignorance

ps i have a standard 97 p classic is stock ecu unable to be re mapped......

 

Hello mate , yeh def will need a remap , if you put a diff turbo on anything it shud work jst fine jst without the power increase your looking for , with a remap your ecu software will be suited to the new turbo , same with the uprated fuel pump , nt to sure if you can bolt those on without a remap and the engine will run fine , mre than likely will need the same as with the turbo so your engine management runs in tune with your more powerfull tuning parts hope this helped ya buddy

 

Yes you will need a remap, not so much because you wont be getting the best out of it, but because you could be looking at a rebuild very soon.


Your stock ECU will not be mappable as it is, you will need to get a replacement, best speak to someone like JGM, API, ZEN etc etc for your mapping needs.

 

As has been said you need a remap due to turbo change..

Standard manangement as you said is not remappable.. you need something like Apexi PowerFC, SimTek, Link etc..

Simon