right then where to start.

sorry for not coming on for a while, scooby isnt on the road yet and been working on my other cars so scoob has taken a back seat, but now i want it on the road.

few problems,

got 3 error codes

24 Idle air control solenoid
31 Throttle position sensor
45 Pressure sensor / Pressure exchange solenoid valve

24 - do you think this means i need a new one or can it possibly be cleaned inside? with zetec engines ICV can be sat in some petrol and cleaned as the spring sticks, but the scoobs on looks like it works on turning axis (if that makes sense?)

31 - Im guessing this is most likely to be fooked and need a new one, or is there any other scoobs traits worth checking first?

45 - whats this do and where is it and what could be the issue with it?

thanks for your help guys,

 

have you reset the ecu and they reoccur?

the pressure sensor and pressure exchange solenoid are on the drivers side inner wing.. follow the vaccum line from the inlet manifold towards the inner wing and you will find them on the end of it.. check the pipe hasn't come off.

The 31 and 24 are likely to be related ie. if the throttle position is not set right the ecu won't be switching into idle mode and openning the idle valve etc

or if a pipe is off it will be trying to cope with a vaccum leak etc

Simon