Hi,im pretty much set to carry out the parallel fuel rail mod on my 95RA,(as soon as my red wrinkle paint turns up!)but was just looking at the plumbing for the 5th injector. It T's into the metal fuel supply rail under the manifold,but i intend on removing all the existing metal pipes and replace with braided hose.
Can i cut the 5th injector supply,and leave it with no fuel supply,still electrically connected,as i've heard it's not used anyway? I thought of connecting a spare bit of fuel hose to the 5th injector,and running it to a more accessable place,as the feed runs to under the inlet manifold,but still with no fuel supply.
Of course i could t it back into the supply,but don't see the point?!

Thanks,Mit

 

its not used anyhows so simply leave out

 

Thanks,will do,just wanted to make sure!