Injector size - Please help!!!!!!
#1
Scooby Regular
Thread Starter
Join Date: May 2003
Location: Durham
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Injector size - Please help!!!!!!
Hi there. does anyone know what the flow rate of the 2001 ej20 sohc injectors is? im just finishing off my supercharger conversion but wanted to know if i should put some wrx (380cc) injectors in? i just dont want it to run lean when im driving it but as the ecu's cant be mapped, i wanted to make sure it wont run too rich at idle or have starting problems. any help / advice is appreciated. thanks, andy.
#2
Scooby Regular
??? You've done a blower conversion on an NA engine but you don't have any standalone engine management? IIRC 380's are generally capable of up to 300bhp but no more, 440's will get you into the mid 300's etc. but that's with proper ECU control and mapping, not just by swapping injectors around... whatever you do, it sounds like you'll need an adjustable regulator and an AFR gauge to get this thing running. And a hell of a load of other stuff now I come to think about it.
#3
Scooby Regular
Thread Starter
Join Date: May 2003
Location: Durham
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
hi im looking at around the 200-240bhp power band for now. i have adjustable fuel regulator and afr gauge already so will know how lean/rich it will run. was just wondering if anyone knew how the injectors would hold up before i faffed on replacing them. ive decided that if the ecu doesnt agree then i'll take it up to andy forrest and see what he can do. ive heard theres nothing he cant do with ecu's ;-)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM