Remap Questions
#1
Remap Questions
Hi Im after a remap shortly on my Version 3 Sti.
If i were to change the diameter of the exhaust after a map would it need re-mapping? or am i better off doing this first?
Also, will i need a better fuel pump? im running a full decat and an induction kit
Thanks
If i were to change the diameter of the exhaust after a map would it need re-mapping? or am i better off doing this first?
Also, will i need a better fuel pump? im running a full decat and an induction kit
Thanks
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
best to get all the mods done first.
Anything that increases power or influences air or fuel entering the engine, or exhaust gasses leaving the engine / turbo will effect the map within the ecu.
Some changes have little effect like back box change of same diameter etc.. but I have seen alterations to fuelling between makes of the same diameter exhaust so it would be best to get all the mods on before it is remapped or get it checked after to make sure it is still running at optimal
Simon
Anything that increases power or influences air or fuel entering the engine, or exhaust gasses leaving the engine / turbo will effect the map within the ecu.
Some changes have little effect like back box change of same diameter etc.. but I have seen alterations to fuelling between makes of the same diameter exhaust so it would be best to get all the mods on before it is remapped or get it checked after to make sure it is still running at optimal
Simon
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM