bob r

iTrader: (46)

I have just got my mits on a newage WRX topmount i/c. It has come with the Samco Y peice and o/e dumpvalve.

Looking at the Samco hose, I think this will need changing to a classic Samco Y peice.

What other mods are needed to make the tmic fit my RB5.

Thanks Bob

scooby-k

hoses should line up with the exception of the dump valve hose. your RB5 hose comes to the right of the dumpvalve whereas the newage exits at the bottom left. There is a metal pipe underneath that this connects to and is shorter on newage. Other than that you may need to alter brackets to align with IC mounting points.
ken

bob r

iTrader: (46)

The i/c hose is certainly a different size to my classic one.

Btt for any other thoughts.

bob r

iTrader: (46)

top

banny sti

iTrader: (68)

You will need to bend the passenger side bracket and extend the drivers side bracket to fit, you can use a samco silicone hose for the dv and you will also need to change the undertray to get full coverage of the core.

banny

bob r

iTrader: (46)

Cheers

Would a standard d/v hose work the same?

banny sti

iTrader: (68)

It should do as even if there is a slight kink in the hose, did this conversion to my brother's my00 wrx ra last year and it went on fairly easily.
Would also recommend a slightly taller scoop but not an sti 8 type as they look horrid on a classic.

Banny