Hi Guys,

Im new to scooby net so I will introduce myself properly next time, sorry , but I have a bit of a problem with my Apexi Power FC.

I drive a 97 WRX STI Type-R from japland and I recently got it remapped here in Ireland. Now it was kind of fine for a while but just lately a recurring problem has become very annoying. The car was mapped at 1.3 bar boost and when ever I drop the boot it may hit 1.33bar boost or there abouts. This is ok but once in a while (more often now) the car is slower under acceleration with the same boost levels. So I went into the settings menu on the power FC, now bear with me, these are the steps I took:

Settings - Boost - than a screen appears like this

1. 1.0...........32...255
2. 1.1...........36...255
3. 1.2...........42...255
4. 1.3...........56...255

Now its the last value thats high lighted that drops down to 204 or 216 only when the car feels slower on acceleration. This correspsonds to the 1.3bar boost level, so Im thinking the acceleration issue and the boost level is related.

How I fix it is just change the 56 value to 58 and back to 56 and the next time i accelerate it might be grand or it might return to being slower on acceleration.

Im trying to get a mapping session with one of the lads from england but its tough getting on the list. Can anyone give me any advice on this

cheers guys..

regards
Paddy