Fitting 440's Phase 2 ----> Phase 1
#1
Fitting 440's Phase 2 ----> Phase 1
Hi all,
Tried using the search but cant find a guide or clear instructions on doing the above. I have Phase 2 440's with the Lateral Injector Adaptor kit to fit the phase 1 rail and wondered if there are any tips
I dont have a fuel pressure gauge so what should be the best way to make sure there seated properly
Tried using the search but cant find a guide or clear instructions on doing the above. I have Phase 2 440's with the Lateral Injector Adaptor kit to fit the phase 1 rail and wondered if there are any tips
I dont have a fuel pressure gauge so what should be the best way to make sure there seated properly
#2
I guess if they are not seated properly you'll know pretty quickly as the smell of petrol will be very high.
I've seen Phase 2 injectors fitted and all I can say is just make sure you take your time and double-check everything.
I've seen Phase 2 injectors fitted and all I can say is just make sure you take your time and double-check everything.
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM