ccSTi8

Hi there,

I am close to aranging a stage 5 (as per Andy Forrest website) upgrade on my car and will need to replace the standard STi clutch and a few other parts when i do so. At present my car has the following:

Full Milltek Decat turbo back 3” bore exhaust
Tubular exhaust headers and flow matched uppipe
Walbro 255 l/hr uprated fuel pump
Ecutek custom remap
NGK PFR 7B uprated spark plugs
Twin port 650cc Injectors
Custom cold air induction
AFP 321H custom turbocharger
AVCR Boost Controller
Apexi Turbo Timer
PSI3 monitor

I will be going for the next stage as per Andy's website:

Fuel Lab turbo specification fuel pressure regulator with fitting kit & gauge
AFP 321T custom turbocharger
NGK racing 8 spark plugs
Ecutek re-map from ANdy

I also plan to change/add the following:

2.5 litre bottom end
Uprated pistons, rods and cylinder head gasket
Flywheel
Clutch
Oil cooler

Is there any particular brand of flywheel/clutch i should be thinking about here? I want to retain the driveability of the car and not be stuck with an on or off type paddle clutch?

Also, is there anything missing off the lists that i should be thinking about here?

The MD321H Turbo was supplied by Andy forrest and fitted in October last year and has covered about 5k miles or so - this may be for sale if anyone is interested in it. Drop me a pm.

Chris