Upreated STI undertray
Thread Starter
Scooby Regular
Joined: Oct 2007
Posts: 209
Likes: 0
From: Waltham Cross
Upreated STI undertray
Hiya Guys
Upgrading to a STI Intercooler on my Bugeye, but am having a little trubble locating an STI Undertray. Come accross this on ebay and wondered if its worth getting?
01-05 SUBARU IMPREZA WRX STi INTERCOOLER COOLING PANEL on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 11-Jun-08 16:20:57 BST)
Upgrading to a STI Intercooler on my Bugeye, but am having a little trubble locating an STI Undertray. Come accross this on ebay and wondered if its worth getting?
01-05 SUBARU IMPREZA WRX STi INTERCOOLER COOLING PANEL on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 11-Jun-08 16:20:57 BST)
Last edited by Chrisn01; May 13, 2008 at 05:48 PM. Reason: wrong link
Scooby Regular
Joined: Aug 2004
Posts: 2,086
Likes: 0
From: Nottingham
I bought mine from Subaru as i got bored of looking for one everywhere else.
Ok it was not dirt cheap, but it is the correct and proper part.
Looking at that picture there is no rubber seal with that at all.
As per your WRX one, the STi one has a rubber seal that goes around it also.
If you do order one, make sure you get all the bits you need. i.e. plastic clips for both the rubber to tray fixing and for the underbonnet matting stuff, as this needs cutting slightly to fit the STi tray and hence the big plastic clips break to get them out.
17 odd clips to fit the rubber to the tray, and a couple of big clips for the bonnet heat/noise reduction covering.
Dont forget the STi bonnet scoop too if you are doing it 'properly'.
I know some have not done this and i dont know what difference this could make in real terms. But in cost terms it makes a bloody big difference! LOL
Ok it was not dirt cheap, but it is the correct and proper part.
Looking at that picture there is no rubber seal with that at all.
As per your WRX one, the STi one has a rubber seal that goes around it also.
If you do order one, make sure you get all the bits you need. i.e. plastic clips for both the rubber to tray fixing and for the underbonnet matting stuff, as this needs cutting slightly to fit the STi tray and hence the big plastic clips break to get them out.
17 odd clips to fit the rubber to the tray, and a couple of big clips for the bonnet heat/noise reduction covering.
Dont forget the STi bonnet scoop too if you are doing it 'properly'.
I know some have not done this and i dont know what difference this could make in real terms. But in cost terms it makes a bloody big difference! LOL
I don't think that ebay one looks too good, to be honest. The standard one "fills" the scoop way better than that would do, so I'm not sure if that would funnel the air as well.
You could do what I did - I got an STI undertray from Jap Performance Parts (next day delivery). I wanted to keep the WRX scoop, so I chopped the "scoop" part off from the wrx undertray and fitted it with rivets to the STI one. Now I've got a nice mongrel that fits both ends
You could do what I did - I got an STI undertray from Jap Performance Parts (next day delivery). I wanted to keep the WRX scoop, so I chopped the "scoop" part off from the wrx undertray and fitted it with rivets to the STI one. Now I've got a nice mongrel that fits both ends
I didn't bother with all the undertray messing around... the STi Top mount is really very good and I tooled around at 325 BHP with the bugeye WRX undertray but went for the STi Scoop to keep things cooler LOL
Shaun
Shaun
Scooby Regular
iTrader: (2)
Joined: Feb 2003
Posts: 2,726
Likes: 0
From: 2.1 Spec-C .......Pimms O'clock!!
Another vote for Jap Performance Parts in Crawley, I drove down there and picked one up for about £40ish (can't remember now, getting old 
) Came with the rubber skirt and was just a case of unscrewing the WRX one and replacing. It's supossed to make a fair difference for the STi cooler along with the STi scoop 
) Came with the rubber skirt and was just a case of unscrewing the WRX one and replacing. It's supossed to make a fair difference for the STi cooler along with the STi scoop
Thread
Thread Starter
Forum
Replies
Last Post