Workshop Manual - Maintenance
#1
Workshop Manual - Maintenance
Where can I find the info for carrying out my own maintenance on MY 99 UK Turbo?
Know how to carry out most work on the car but could do with references such as torque settings etc.
Just checked haynes website for Impreza manual which states:
"The manual for this model has been short-listed for consideration."
I would have thought a popular model like the impreza would justify a publication!!
Also looking for dealer service schedule so that I can maintain my car to Main Dealer standards.
Looking to change cambelt, but should other components be replaced at the same time ie. Idler pulley, tensioner?
Or should these just be inspected for wear etc.
The Car has only done 54K miles so would expect these to be in good working order.
Your help/advise appreciated
Thanks Lee
Know how to carry out most work on the car but could do with references such as torque settings etc.
Just checked haynes website for Impreza manual which states:
"The manual for this model has been short-listed for consideration."
I would have thought a popular model like the impreza would justify a publication!!
Also looking for dealer service schedule so that I can maintain my car to Main Dealer standards.
Looking to change cambelt, but should other components be replaced at the same time ie. Idler pulley, tensioner?
Or should these just be inspected for wear etc.
The Car has only done 54K miles so would expect these to be in good working order.
Your help/advise appreciated
Thanks Lee
#2
Scooby Regular
iTrader: (3)
Hey up Lee!
There is no Haynes Impreza manual. This site should provide everything you need to know. Not sure if you can use the search facility but it is worth the money if not.
Someone here normally knows the answer to your question.
Wayne.
There is no Haynes Impreza manual. This site should provide everything you need to know. Not sure if you can use the search facility but it is worth the money if not.
Someone here normally knows the answer to your question.
Wayne.
Last edited by Welloilbeefhooked; 20 March 2008 at 09:41 AM. Reason: Replying to question about "Haynes" manuals
#4
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: Chester
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
There are manuals
Chris Palmer's Home Page
click on link, then scooby, then work shop manuals , all work shop manuals for up to my99 all clasics are pretty much the same , you can down load and put on cd, all torque settings ect , used it to strip and re-buid my 93 engine .
hope this helps
Mark
Chris Palmer's Home Page
click on link, then scooby, then work shop manuals , all work shop manuals for up to my99 all clasics are pretty much the same , you can down load and put on cd, all torque settings ect , used it to strip and re-buid my 93 engine .
hope this helps
Mark
#5
Thanks for the help.
Chris Palmers Page looks good.
(Info Covers upto 1998? will most of this info be relevent for my99 model also?)
For some reason can't dowload files on my Work PC, so will try at home when I get chance.
Thanks again Lee
Chris Palmers Page looks good.
(Info Covers upto 1998? will most of this info be relevent for my99 model also?)
For some reason can't dowload files on my Work PC, so will try at home when I get chance.
Thanks again Lee
Thread
Thread Starter
Forum
Replies
Last Post