Closed deck block
31 January 2008, 07:18 AM
#3
A simple bare block which might need a hone and certainly machining for a new crank will be about £200. Bought/sold mine for this figure late last year.
Ready to go they are about £450, bored they will be about £800 or less.
2.2/2.5 capacity will add more ££££
These are all 2 litres.
Good people to ask are David at Welcome to the API website
Mark at Lateral Performance
Ready to go they are about £450, bored they will be about £800 or less.
2.2/2.5 capacity will add more ££££
These are all 2 litres.
Good people to ask are David at Welcome to the API website
Mark at Lateral Performance
Last edited by 911; 31 January 2008 at 07:24 AM.
31 January 2008, 10:28 AM
#4
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
A simple bare block which might need a hone and certainly machining for a new crank will be about £200. Bought/sold mine for this figure late last year.
Ready to go they are about £450, bored they will be about £800 or less.
2.2/2.5 capacity will add more ££££
These are all 2 litres.
Good people to ask are David at Welcome to the API website
Mark at Lateral Performance
Ready to go they are about £450, bored they will be about £800 or less.
2.2/2.5 capacity will add more ££££
These are all 2 litres.
Good people to ask are David at Welcome to the API website
Mark at Lateral Performance
David APi
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
bluebullet29
General Technical
9
05 October 2015 02:17 PM