Aps exhaust
29 August 2007, 12:45 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Aps exhaust
Guys i have the 4 1/2 inch APs race exhaust system, when it went on the car i was only doing track days so noise wasnt an issue, im now using it as a daily driver and getting a lot of very strange looks from people, it has a very deep resonating sound etc. Is it possible to change the back box for something quiter or will it need a remap as well?
29 August 2007, 01:08 PM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
you can get a bung for them.. either custom job by H&S, cannot remember if APS do a bung themselves or not.
I don't believe you can get another back box to fit the APS pipework unless APS have started doing one since I last looked.. so you would be changing most of the exhaust so map would need checking etc..
Simon
I don't believe you can get another back box to fit the APS pipework unless APS have started doing one since I last looked.. so you would be changing most of the exhaust so map would need checking etc..
Simon
29 August 2007, 04:49 PM
#3
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
you can get a bung for them.. either custom job by H&S, cannot remember if APS do a bung themselves or not.
I don't believe you can get another back box to fit the APS pipework unless APS have started doing one since I last looked.. so you would be changing most of the exhaust so map would need checking etc..
Simon
I don't believe you can get another back box to fit the APS pipework unless APS have started doing one since I last looked.. so you would be changing most of the exhaust so map would need checking etc..
Simon
Can anyone make one?
What are thet made of?
Sorry for all the questions dont know much about this!
30 August 2007, 12:25 PM
#5
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
I had H&S make one for my ninja, which was real loud - non-res and full decat.
Cost £25 +vat +del
Took a bloody lifetime and about 6 drill bits to put the hole in the backbox to screw the bung into.
Cost £25 +vat +del
Took a bloody lifetime and about 6 drill bits to put the hole in the backbox to screw the bung into.
30 August 2007, 01:16 PM
#6
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
