Notices

Turbo timer not working properly.

Thread Tools
 
Search this Thread
 
Old 15 June 2007, 10:05 PM
  #1  
konceppt
Scooby Regular
Thread Starter
 
konceppt's Avatar
 
Join Date: Dec 2005
Location: noak bridge,essex
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Default Turbo timer not working properly.

Hi guys.I finally picked my wrx up today and it is fookin brilliant.only problem is when i come to a stop and switch the key off the turbo timer counts down but the engine switches off when i turn the ignition off.i thought the turbo timer should keep the engine running for the time that the turbo timer counts down.The car has no alarm so it is not this causing it.the car has no alarm so it is not this causing the problem
Old 16 June 2007, 09:56 AM
  #2  
jturbo
Scooby Regular
 
jturbo's Avatar
 
Join Date: Apr 2007
Posts: 222
Likes: 0
Received 0 Likes on 0 Posts
Default

check that it is still wired up, also set it at a diffrent amount of time and try that,what make is it also what car?
Old 16 June 2007, 12:18 PM
  #3  
konceppt
Scooby Regular
Thread Starter
 
konceppt's Avatar
 
Join Date: Dec 2005
Location: noak bridge,essex
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Default

it is a 96 wrx turbo.(import)
the turbo timer is a hks one.
i removed the lower dash and found two thick wires from the turbo timer disconnected and taped up.only trouble is i do not know where they go.
Old 16 June 2007, 01:15 PM
  #4  
coleyswrx
Scooby Regular
 
coleyswrx's Avatar
 
Join Date: Apr 2007
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default

they go to you ignition but if i were you i would go to a hks dealer and get a wire harness, saves chopping wires about and is cheap enough bout 20 quid i did the same on my MY93 WRX with a blitz FATT turbo timer just not worth it as rooms tight under there too, hope this helps.
Old 16 June 2007, 01:52 PM
  #5  
konceppt
Scooby Regular
Thread Starter
 
konceppt's Avatar
 
Join Date: Dec 2005
Location: noak bridge,essex
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks.i have been looking around to see other chopped wires to see if it had been connected then disconnected.seems like someone bought it and then didnt know where to put the wires so they just left it.one wire is yellow and the other is black i think.
Old 16 June 2007, 06:50 PM
  #6  
konceppt
Scooby Regular
Thread Starter
 
konceppt's Avatar
 
Join Date: Dec 2005
Location: noak bridge,essex
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Default

to what wires on the ignition should i connect these two turbo timer wires(what colours)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
sedge69
Lighting and Other Electrical
9
12 September 2015 10:39 AM



Quick Reply: Turbo timer not working properly.



All times are GMT +1. The time now is 11:08 PM.