Crank and Cam Sensors
18 February 2007, 08:34 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: Norwich
Posts: 1,526
Likes: 0
Received 0 Likes
on
0 Posts
Crank and Cam Sensors
Right, 
What type of sensor is the crank and cam sensor? Ie does it run a trigger wheel for the crank,and a phase sensor on the cams?If so on what cam is the sensor on?As the crank one is on the crank pulley?
Also has anyone got any pictures of these sensors?
MY02+ Impreza Sensor/Solenoid Valve Pics & Location - ScoobyMods
So are I take it the crank one works on a trigger wheel setup?And the cam one works on a phase sensor/photo chopper wheel design?
What type of sensor is the crank and cam sensor? Ie does it run a trigger wheel for the crank,and a phase sensor on the cams?If so on what cam is the sensor on?As the crank one is on the crank pulley?Also has anyone got any pictures of these sensors?
MY02+ Impreza Sensor/Solenoid Valve Pics & Location - ScoobyMods
So are I take it the crank one works on a trigger wheel setup?And the cam one works on a phase sensor/photo chopper wheel design?
18 February 2007, 09:34 PM
#3
Scooby Regular
Join Date: May 2006
Posts: 2,278
Likes: 0
Received 0 Likes
on
0 Posts
Crank sensor for a 95 WRX. Cam sensor is similar but is slightly larger on diameter (I think its the same but with a thin walled sleeve pressed on)
Last edited by MMT WRX; 18 February 2007 at 09:36 PM.
18 February 2007, 09:53 PM
#5
Former Sponsor
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Yes the crank has the sensor just above and the cam sensor is on the front right bank above the inlet cam pulley.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM