K&N
Scooby Regular
Joined: Aug 2001
Posts: 10,954
Likes: 0
From: Hampshire
Haven't we been over this loads 
Do a search
lol - K&N seem to have no failures mate so would be one of the best bets. Price is about 85 quid. Some people say makes a big difference, others say a good panel (ITG) is just as good.
Induction will give you more sound!!!
Do a search
lol - K&N seem to have no failures mate so would be one of the best bets. Price is about 85 quid. Some people say makes a big difference, others say a good panel (ITG) is just as good.
Induction will give you more sound!!!
Scooby Regular
Joined: Nov 2001
Posts: 304
Likes: 0
Plantie
I had a K+N Induction Kit on my P1 but it drove me crazy.....all that woshing all the time so I took it off and replaced it with a normal K+N element and I find that much better.
I didn't notice much if any power gain with the induction kit but feel that the element does add some small performance gains without that silly noise all the time.
Just my thoughts and opinions and I hope they are some use.
Cheers
Viper
I had a K+N Induction Kit on my P1 but it drove me crazy.....all that woshing all the time so I took it off and replaced it with a normal K+N element and I find that much better.
I didn't notice much if any power gain with the induction kit but feel that the element does add some small performance gains without that silly noise all the time.
Just my thoughts and opinions and I hope they are some use.
Cheers
Viper
Oi Plantie you muppet!
I'm what - 5 minutes from your place?
57i kit fitted if you want a ride (ooh err!)
Yup, it makes some induction/blow off noise, but with your atmos BOV, you won't be able to notice on the RB5!
As to power, dunno. Rolling road required to check any changes but I'd guess only a couple of hp really. Some say the top end breathing's better but I'm a good boy (honest officer) so I wouldn't know!
Cost is about £80 - £90 - don't pay anyone to fit it, it's a piece of p1ss with Chiark's instructions!
Give me a shout if you've any more questions mate.
Cheers,
Steve
I'm what - 5 minutes from your place?
57i kit fitted if you want a ride (ooh err!)
Yup, it makes some induction/blow off noise, but with your atmos BOV, you won't be able to notice on the RB5!
As to power, dunno. Rolling road required to check any changes but I'd guess only a couple of hp really. Some say the top end breathing's better but I'm a good boy (honest officer) so I wouldn't know!
Cost is about £80 - £90 - don't pay anyone to fit it, it's a piece of p1ss with Chiark's instructions!
Give me a shout if you've any more questions mate.
Cheers,
Steve
Morning mate - you're right, Vizzavi is sh1te. Just had my e-mail to you bounce!
Here's the info I promised on the phone:
Nick's site: http://www.chiark.com/scooby/kandn.asp
Like I said, it's up to you if you think it's worth the risk of blowing the MAF, although the K&N seems less likely to by all accounts. Maybe a panel filter would be best (K&N, ITG etc.) in your case (MY99) - I mean, we're only talking a couple of bhp anyway.
Cheers,
Steve
Edited coz I forgot to make the URL work! 'Chelle's right - I'm a muppet 
[Edited by spider - 11/27/2001 9:49:25 AM]
Here's the info I promised on the phone:
Nick's site: http://www.chiark.com/scooby/kandn.asp
Like I said, it's up to you if you think it's worth the risk of blowing the MAF, although the K&N seems less likely to by all accounts. Maybe a panel filter would be best (K&N, ITG etc.) in your case (MY99) - I mean, we're only talking a couple of bhp anyway.
Cheers,
Steve
Edited coz I forgot to make the URL work! 'Chelle's right - I'm a muppet
[Edited by spider - 11/27/2001 9:49:25 AM]
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
