powerwrx

iTrader: (11)

Ayone know what this pipe is for. it connects to a t piece as shown. i noticed that the pipe had split. the pipe dissaperes past the turbo. any help would be great

millwrx

iTrader: (1)

pipe with the tee piece gos to the boost solinod,think the extra pipe is for a boost gauge etc,best to trace the pipe to see were it gos

Criss

Could be a pipe for PSI readout of the turbo load.

Usually read in BAR, IE 1 bar.

Have your got a boost guage in the car??

powerwrx

iTrader: (11)

yeah i have a boost guage

SNAP-ON

iTrader: (1)

That pipe with the t piece in it goes to the top of the boost solenoid and its normally the pipe you t piece into when you fit a boost gauge , hence the t piece . the split pipe normally goes to a boost gauge in the car ! do you have a gauge fitted? does the split pipe run into the car through the bulk head ?

powerwrx

iTrader: (11)

yeah mate i have a gauge fitted, the pipe runs up by the turbo then dissapears, i presume it goes into the car as you have said.