Anyone know how to disarm the sense and tell on a clifford alarm?

not sure which model it is as it was on when i bought the car and the local clifford dealer wasn't intrested and were gonna charge me £100.

all they said is that it was the G4 series or something.

the car keeps shouting at people walking past it up to 6 feet away and when any cars drive past and its doing my head in!!

any ideas lads?

cheers!

 

That's a *******. I'd never have got a Clifford if it hadn't come with my Scoob when I bought it. You need to turn off the proximity alarm anyway, I seem to recall it's channel 10 on your keyfob which is two presses at the same time. Which two I can't remember. Apart from that, if it's setting off so regularly, the sensor probably needs sorting out anyway, and I'm not sure if you can alter the sensitivity yourself. Unless you get a Cliffnet kit off of ebay for £30 and then you can plug a laptop in. I've still not got round to that yet though.

 

On the old sense and tell units you can turn the interior and exterior zones down manually. There should be a box in the car with a switch and + & - buttons on it. If you can't locate that then it needs adjusting by the remote. Dual zone prox is set by the remote not Cliffnet.

 

download all instructions here

www.directed.com


but suppose you need to know which model , like me ... if you know were it is in the car think its says on the front of the black box , but will let you know that when i find mine