I believe the black carbon collector(not sure of the proper name) cannot be just be removed without it affecting the running of the engine,so i was wondering how you lot got around removing it as i would like to make some space for boxing in the induction kit in?

 

Tee the 2 pipes together and vent the pipe into the chassis,I left the 1 way valve in line.
Try this link
http://bbs.scoobynet.co.uk/showthrea...+cannister+mod

 

probably a stupid question but were did the one way valve come from and why vent to chassis?

 

NRV was in my line already,but you dont need it.Vent to where ever but remeber to blank off the hose into the inlet pipe.

 

thanks for your help, just to be sure you blank off the pipe ontop of the inlet and vent the other pipe into the chassis with the nrv in the line?

 

Take a look at that link in post 2 the pic is how you should tee the 2 lines together and blank off the inlet

 

I've tried but i can't get the photo link's to work?

 

http://img.photobucket.com/albums/v4...s/canister.jpg