to change the pipe that comes from the turbo to the air box on a 2002 wrx as minse has a big slit in it

i have the new pipe and im gonna start it on sunday any help would be graet

 

Think you have to lift the inlet manifold slightly.
Should be ok, just take your time, take lots of photos and label where everything goes.

 

if you are buying an after market one you can ( with allot of swareing and bodging) squease it through

but after doing this and taking the inlet off, I would recommend removing the inlet

if I was removing the inlet I would change gaskets but that might be the novice " must follow the guide" in me