V7 PRODRIVE ECU
19 July 2006, 03:34 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2006
Location: WIGAN
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
V7 PRODRIVE ECU
Dose any one know if I could put a v7 prodrive ecu in a 94 wrx import would it fit and would it work. The turbo is controlled by an hks boost controller so the ecu won’t have to control the turbo just the other stuff it dose
19 July 2006, 03:37 PM
#2
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
doubt it, or if it did it would be far too much hassle to get right.
the newer ECU would also be set up for AVCS which the old car doesnt have.
the newer ECU would also be set up for AVCS which the old car doesnt have.
19 July 2006, 05:23 PM
#5
Yep straight swap. The V7 is a standard UK ECU, circa 1994/1996 and the Prodrive bit is the chip that's fitted inside.
The chip will be running post sept94 WRX (Z4) code, but with boost pressure peaking at 13.65psi.
Currently your standard WRX ECU (if it's a W6, U8 or 2C) will be running 11.47psi.
The chip will be running post sept94 WRX (Z4) code, but with boost pressure peaking at 13.65psi.
Currently your standard WRX ECU (if it's a W6, U8 or 2C) will be running 11.47psi.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM