fatrhino2000

hi there,
not long bought my first scooby, a 02 wrx with the ppp kit. these are rated at 265bhp, i put mine on the rolling road and it only read 211bhp. i got told to change the MAF sensor so i did and it did not make much of a difference?? can any one HELP please.

Dyney

Do you "Know" it's been PPP'd or was it the previous owner that "told" you?

If you bought it from a dealer take it in and ask them to check the ECU for fault codes and reset the ECU.
If you didn't get it from a dealer then any Subaru specialist should be able to check for codes and reset it. (Probably cheaper than paying a dealer)

fatrhino2000

i have got the ppp ticket. the ecu has been checked and reset, i have had a little change in performance but not a grate deal.

Midlife......

iTrader: (2)

Bugeye WRX 02 came with 215 BHP and the PPP took it to 240 ish ...........on a good day

On a hot day on the RR you will struggle

Where are you ??

Shaun..

WRX_Rich

iTrader: (5)

as this man says

if it has a ppp look for a single pipe backbox and a blue samco pipe under the intercooler

if the car was ppp'ed after 2003 it should be a new version which could go up to 265

ppp'd cars should come with prodrive paperwork

fatrhino2000

iv got all the paper work for the ppp, it does have the backbox and the blue prodrive pipe. so what kind of bhp should i be expecting to see?? thanks.
im from north wales.