T70 on ej22??
#1
T70 on ej22??
Hi, Ive gotta engine swap on my wrx ( ej22),
actually Ive got in my car
ej22
link ecu
VF22
and some other things
My question is:
this turbo (solds on Ebay)
SUPER 70
*60.5mm
• A/R RATIO .70
• TURBINE HOUSING A/R .84
• COMPRESSOR HOUSING .70
• T3/T4 FLANGE
fits good on ej22 engine??
somebody knows anything about this operation?? this turbo its big, I dont know if I can paste the quick link on this forum, any way http://www.ssautochrome.com/level.itml/icOid/1489 ( if this link is removed the turbo has been sold on ebay, for pictures)
I apreciate ur answers
regards
actually Ive got in my car
ej22
link ecu
VF22
and some other things
My question is:
this turbo (solds on Ebay)
SUPER 70
*60.5mm
• A/R RATIO .70
• TURBINE HOUSING A/R .84
• COMPRESSOR HOUSING .70
• T3/T4 FLANGE
fits good on ej22 engine??
somebody knows anything about this operation?? this turbo its big, I dont know if I can paste the quick link on this forum, any way http://www.ssautochrome.com/level.itml/icOid/1489 ( if this link is removed the turbo has been sold on ebay, for pictures)
I apreciate ur answers
regards
#2
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
The compressor map is horrible, and IMHO, it's going to be VERY laggy on a 2.2lt.
Yes it is big, but the GT series ball bearing turbo's are far better, but a lot more expensive.
There is a good reason for this !
Mark.
Yes it is big, but the GT series ball bearing turbo's are far better, but a lot more expensive.
There is a good reason for this !
Mark.
#3
Scooby Regular
Join Date: Jun 2005
Location: Innerleithen / Edinburgh
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
I would imagine it would work well on Supras/Skylines, but you will probably find it very, very laggy and not a lot of use below 4-5000 revs on your setup.
#5
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
How much power are you aiming for, and is your engine standard, or up rated (pistons/rods) ?
Mark.
Mark.
Thread
Thread Starter
Forum
Replies
Last Post