Help ......
12 May 2006, 08:39 PM
#1
Scooby Newbie
Thread Starter
Join Date: Apr 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Help ......
I've got a 94 WRX that I recently converted from auto to manual, when the car came out of the garage it came up with fault codes 24, 31, and 45.
I was told it may be problem with it being an auto ecu,so got an ecu from an Ra manual.
Changed the ecu and now only getting code 31 (tps)
Changed that with one that I knew was ok but no joy.
The engine lights on tickover but then goes off when driving away, but seems to come on between 2-3k revs. When it comes on the power is cut as if the car is going to cut out.
Tried resetting the ecu but no joy!!!
Any help appreciated as it's driving me NUTS!!!!
I was told it may be problem with it being an auto ecu,so got an ecu from an Ra manual.
Changed the ecu and now only getting code 31 (tps)
Changed that with one that I knew was ok but no joy.
The engine lights on tickover but then goes off when driving away, but seems to come on between 2-3k revs. When it comes on the power is cut as if the car is going to cut out.
Tried resetting the ecu but no joy!!!
Any help appreciated as it's driving me NUTS!!!!
Thread
Thread Starter
Forum
Replies
Last Post