cel light help
16 April 2006, 12:15 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2005
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
cel light help
engine light on in car got it pluged in and came up with ( p0546 exhaust gas temp sensor circuit high bank 1 sensor 1) i have megan racing manifolds fitted to my car but all sensors are still in place or is this telling me the sensor is nackered any advice cheers momo
16 April 2006, 05:21 PM
#3
Scooby Regular
Join Date: Sep 2003
Location: No longer Japan !
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
The error message suggests the sensor is open circuit. Check the wires to the sensor, make sure nothing has fallen off. If nothing has fallen off, take it to a dealer and they'll diagnose further, possibly resulting in a new sensor being fitted. Is the car still under warranty?
16 April 2006, 05:43 PM
#4
Scooby Regular
I got this fault up on my bugeye after I de-catted the up pipe and plugged the point for the sensor. I'm guessing your sensor is knackered. Check out this thread for some good tips on the EGT up pipe sensor (about a third of the way down the page). http://forums.nasioc.com/forums/showthread.php?t=443943
I did the CEL fix described on it and have had no more problems.
I did the CEL fix described on it and have had no more problems.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
toyney83
General Technical
10
02 October 2015 08:38 PM
Phil3822
General Technical
0
30 September 2015 06:29 PM