Turbo porting
10 February 2007, 10:07 AM
#3
Former Sponsor
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Porting the turbo involves working the exhaust housing inlet ideally matching the turbo and your up pipe and ensuring the exhaust housing inlet has any unevenness or deviations from factory castings removed as this will improve flow.Widening the of the exhaust housing inlet can also be done to a small degree built again the up pipe must be matched or any gains will decrease. The process is similar to that of porting oe headers...
Other turbo porting would include the compressor housing but this would usually be done to reduce surge and would be specifically supplied as a ported unit from the manufacturer
Hope this helps.
Other turbo porting would include the compressor housing but this would usually be done to reduce surge and would be specifically supplied as a ported unit from the manufacturer
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM