boost restrictor mod
Thread Starter
Scooby Regular
Joined: Jul 2005
Posts: 269
Likes: 0
boost restrictor mod
Anyone had this mod done and can you tell me the safe inside diameter of the restrictor used,
I have read loads on this from the scoobymods site but one guy has used a restrictor with a internal bore diameter of 2.3mm which sounds a bit big to me.
The car in question is a MY02 WRX
cheers
I have read loads on this from the scoobymods site but one guy has used a restrictor with a internal bore diameter of 2.3mm which sounds a bit big to me.
The car in question is a MY02 WRX
cheers
Last edited by justanotherperson; Feb 5, 2006 at 02:49 PM.
Pre 96 bigger hole = more boost. But only marginal as the ECU will pull back the boost to near stock levels.
Post 96 Smaller hole = more boost. Same results as abobe though.
you will get boost spikes and/or fuel cut and the ECU will try to pull the boost back to near standard levels.
Pointless mod unless you are trying to re-configure/control the boost after other mods have upset things.
Post 96 Smaller hole = more boost. Same results as abobe though.
you will get boost spikes and/or fuel cut and the ECU will try to pull the boost back to near standard levels.
Pointless mod unless you are trying to re-configure/control the boost after other mods have upset things.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM