Torque Setting For EJ20G
28 January 2006, 05:20 AM
#1
Scooby Newbie
Thread Starter
Join Date: May 2005
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Torque Setting For EJ20G
Hi, Just trying to finish off the engine but have no torque settings for things like headbolts, oil pump inc gear cover, camshaft journals etc... Engine is out of a 1993 WRX, and headgaskets have been upraged to Ver3 STi.
Cheers
Cheers
28 January 2006, 10:34 AM
#2
Mains
10mm - 47+or-3Nm
8mm - 25+or-2Nm
6mm - 6.4Nm
Big Ends
Stage1 - 23Nm
Stage2 - 43-46Nm
Cyl Head Stage 1-29Nm 2-69Nm 3-Slacken 180* 4-slacken 180* 5-29Nm 6-80*-90* 7-40*-45* 8-Bolts 1+2only a further 40*-45*
Oil pump to block 6-7Nm
Cam Carrier Caps 18-22Nm
10mm - 47+or-3Nm
8mm - 25+or-2Nm
6mm - 6.4Nm
Big Ends
Stage1 - 23Nm
Stage2 - 43-46Nm
Cyl Head Stage 1-29Nm 2-69Nm 3-Slacken 180* 4-slacken 180* 5-29Nm 6-80*-90* 7-40*-45* 8-Bolts 1+2only a further 40*-45*
Oil pump to block 6-7Nm
Cam Carrier Caps 18-22Nm
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM