KingSport
15 January 2006, 10:16 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2006
Location: Aylesbury Buckinghamshire.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
KingSport
Hello everybody,
My name is Stephen King, and I wish to take this opportunity to tell you a bit about myself.
I have just started my own company called KingSport (Tel: 07725329907). I previously worked for Prodrive for 4 years; I started in the Subaru engine shop in 2001 and stayed there until 2005. In that time I have worked on WRC, Development, Group A and Group N engines. Also rebuilding Turbochargers, Boost packs and all other things that go with it. At the start of 2005 I changed departments and worked for a year in the Race team engine shop. Working on the Ferrari 550 and Aston Martin DBR9 and DBRS9 race engines.
At the start of 2006 I became inundated with work and decided it was time to set up my own company!
So here I am! I am specialising in Subaru engines and believe me when I say I know these very well. I have great contacts and if there is any part you need then I can get it for you i.e. WRC parts, basically anything. Mapping of any management system i.e. Pectel, Motech, Gems, and the rest.
I have my own fully running engine shop, use of an engine dyno and I am here also if you need any advice and help.
I look forward to 2006 and the growth of my company and all the best to everyone.
My name is Stephen King, and I wish to take this opportunity to tell you a bit about myself.
I have just started my own company called KingSport (Tel: 07725329907). I previously worked for Prodrive for 4 years; I started in the Subaru engine shop in 2001 and stayed there until 2005. In that time I have worked on WRC, Development, Group A and Group N engines. Also rebuilding Turbochargers, Boost packs and all other things that go with it. At the start of 2005 I changed departments and worked for a year in the Race team engine shop. Working on the Ferrari 550 and Aston Martin DBR9 and DBRS9 race engines.
At the start of 2006 I became inundated with work and decided it was time to set up my own company!
So here I am! I am specialising in Subaru engines and believe me when I say I know these very well. I have great contacts and if there is any part you need then I can get it for you i.e. WRC parts, basically anything. Mapping of any management system i.e. Pectel, Motech, Gems, and the rest.
I have my own fully running engine shop, use of an engine dyno and I am here also if you need any advice and help.
I look forward to 2006 and the growth of my company and all the best to everyone.
Last edited by KingSport; 15 January 2006 at 10:23 PM.
