Injectors
#1
Scooby Senior
Thread Starter
Join Date: Nov 2005
Location: In the workshop or under some one elses car. PROJECT RA 09 IS GO.
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Injectors
Does anybody know what size/colour injectors are available for my classic MY99/00, and are they diy job?? car has standard at this time.. ie..
YELLOW.....440cc.
What would be the gain of fitting a larger capacity.
John
YELLOW.....440cc.
What would be the gain of fitting a larger capacity.
John
#2
Former Sponsor
iTrader: (30)
Join Date: Jan 2005
Location: FB Tuning Workshop - HP27
Posts: 4,219
Likes: 0
Received 0 Likes
on
0 Posts
Blue are 550's
Red are 740's
Both are compatible with Phase 2 (99/00) fuel rails, but if you use the 740's you will either need to modify the injector or connector, or buy the correct connectors ( They are Nissan fitment )
You only need to consider upgrading if you are hitting 90/100% duty cycle on your existing 440's, and you're needing some extra headroom so that you can push your tune a bit further.
Unless you are getting close to their limits, it's pointless changing them IMO
Red are 740's
Both are compatible with Phase 2 (99/00) fuel rails, but if you use the 740's you will either need to modify the injector or connector, or buy the correct connectors ( They are Nissan fitment )
You only need to consider upgrading if you are hitting 90/100% duty cycle on your existing 440's, and you're needing some extra headroom so that you can push your tune a bit further.
Unless you are getting close to their limits, it's pointless changing them IMO
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM